Mechanical Engineering – M.I.E.T. ENGINEERING

DEPARTMENT OF MECHANICAL ENGINEERING

About Department

About the Department

Mechanical Engineering is a branch of Engineering education, that combines Engineering Physics and Mathematical principles with material science to Design, Analyze, and Manufacture and maintain the mechanical systems.

Department of Mechanical Engineering was started in the year 1998 offering an Undergraduate program (B.E) with the current intake of 120. Department was upgraded as Post graduate department with the commencement of M.E in Manufacturing Engineering in the year 2007 with the sanctioned intake of 18. Based on the academic and infrastructure quality of the department, Anna University has recognized the department as a research department in the year 2015. The department was accredited by NATIONAL BOARD OF ACCREDITATION (NBA), NEW DELHI in the year 2019, certifying the quality performance of the department.

The Department is constantly striving hard to impart quality engineering education focusing on creative thinking, designing, and product development, ability to overcome constraints and provide effective team work with professional ethics. These skills would certainly get the students a career in Automobile, Aerospace, and other industries such as Banking and finance, management sectors, and other private and public sectors.

Under B.E., Mechanical Engineering program, various aspects of Mechanical Engineering such as Thermal Engineering, Manufacturing Engineering, Design Engineering, Automobile Engineering and Industrial management are included.

A team of Commited and highly qualified teachers are constantly taking care of teaching and learning processes of the students. Our classrooms are equipped with ICT and LMS tools for upgrading student’s technical knowledge through remote access. The department is provided with several laboratories equipped with advanced instruments and machineries. Major Laboratories are: Engineering Practices Laboratory, Manufacturing Technology Laboratory, Thermal Engineering Laboratory, Metrology Laboratory, Mechatronics Laboratory, and Strength of Materials Laboratory, Fluid Mechanics Laboratory and CAD / CAM / ANSYS Laboratory and Communication Laboratory.

Most of the faculty members are Doctorate Degree holders and rest of them are pursuing PhD program. The Department is also offering PhD Program under the guidance of Anna University recognized research supervisors. The faculty members are publishing a number of research papers in referred journals. Further 5 patents are published in recognition of their innovation.

The students are encouraged to participate in several co-curricular activities such as seminars, workshops, industrial visits and to undertake student research projects. They are motivated to organize seminars, inviting participants from other institutions. Professors from institution of excellence and industrialist and technocrats are invited to deliver special lectures on the recent technological developments.

To expose the students in industrial environment, several Memorandums of Understanding are executed with industries. The MOU’s are facilitating the students for close industrial interaction, project work and placements. Field visit and Industrial visit are regularly arranged and the students are taken to industries. These activities would benefit the students in understanding the real work – space environment.

Several batches of students are passed out from the department. Many of them are occupying higher positions in core industries, IT field, Banking, State and central Government sectors, and many have established their own business and Industries. The constant interactions of Alumni with the department promote employment opportunities to the present students.

The department is focused to educate and train the students to become a well qualified Engineers who are Innovative Entrepreneur and successful in various field of Mechanical Engineering and catering the ever changing Industrial requirements and social needs. Every year various core companies are visiting the college for campus placement and many of the students are selected and placed through on campus as well as off campus recruitments.

Programmes offered:

B.E. Mechanical Engineering
M.E. Manufacturing Engineering
Ph.D Mechanical Engineering

Vision & Mission

VISION & MISSION

Vision

Establish a globally recognised school of Excellence in the field of Mechanical Engineering.

Mission

Impart quality education in Mechanical Engineering through effective teaching – learning techniques.
Provide necessary infrastructure and facilities for the student’s personal and professional growth.
Expose to specialised Mechanical Engineering domains to harness evolving technologies.
Create awareness in ethical practices followed internationally.

PEO & PSO

Program Educational Objectives (PEO) & Program Specific Outcomes (PSO)

PEO

To expose to the solutions of real life problems applying the skills of basic science, engineering design, manufacturing, thermal science and management.
To educate the students to effectively participate in multidisciplinary projects for the development of our society.
To create awareness among the students in the fields of research and development in mechanical engineering and other allied fields.

PSO

Ability to apply the concepts of Mechanical Engineering fields to design mechanical systems and processes.
Ability to demonstrate professional and entrepreneurial skills to meet the industrial requirements

CO & PO

Course Outcome (CO) for i to VIII Semester Subjects (R 2013)

Course Outcome (CO) for I to VIII Semester Subjects (R 2017)

PROGRAMME OUTCOMES (PO)

PO 1 - Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.

PO 2 - Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.

PO 3 - Design/development of solutions: - Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.

PO 4 - Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.

PO 5 - Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.

PO 6 - The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.

PO 7 - Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.

PO 8 - Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.

PO 9 - Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.

PO 10 - Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

PO 11 - Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.

PO 12 - Life-long learning: Recognise the need for, and have the preparation and ability to engage in independent and lifelong learning in the broadest context of technological change.

Faculty

Dr. A. NAVEEN SAIT

Designation	Professor / Principal
Joining Date	06-12-2019
Qualification	M.E., Ph.D
Nature of association	Regular
Experience (in Years)	22 years
Email id	principalengg@miet.edu

Dr. M.Y. ABDUL JALEEL

Designation :	Professor
Joining Date	02-05-2017
Educational Qualification:	Ph.D.
Experience (in Years) :	18 Years 10 Months
E-Mail ID :	abduljaleel.m.y@miet.edu

Dr.B. SELVAM

Designation	Associate Professor and Head
Joining Date	06-04-2022
Qualification	M.Tech., Ph.D
Nature of association	Regular
Experience (in Years)	25 Years 08 Months
Email id	selvam.b@miet.edu

Dr. M. DHANDAYUTHABANI

Designation	Associate Professor
Joining Date	16-05-2012
Qualification	M.E., Ph.D
Nature of association	Regular
Experience (in Years)	17 Years 3 Months
Email id	dhandayuthabani.m@miet.edu

Dr.M. KIRUBAKARAN

Designation	Assistant Professor (SL.Gr)
Joining Date	26-05-2010
Qualification	M.E., Ph.D
Nature of association	Regular
Experience (in Years)	11 Years 7 Months
Email id	kirubakaran.m@miet.edu

T. RAMKUMAR

Designation	Assistant Professor
Joining Date	24-07-2010
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	14 Years 5 Months
Email id	ramkumar.t@miet.edu

N.ARUNACHALAM

Designation	Assistant Professor
Joining Date	18.08.2021
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	08 Years
Email id	arunachalam.n@miet.edu

S. DAVID KALAISELVAN

Designation	Assistant Professor
Joining Date	02-12-2021
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	9 Years
Email id	david.s@miet.edu

R.MANICKAM

Designation	Assistant Professor
Joining Date	03-12-2021
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	2 Years 7 Months
Email id	manickam.r@miet.edu

S.SATHISH KUMAR

Designation	Assistant Professor
Joining Date	24-12-2021
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	5 Years
Email id	sathishkumar.s@miet.edu

C.MANIKANDAN

Designation	Assistant Professor
Joining Date	11-04-2022
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	06 Years
Email id	manikandan.c@miet.edu

J.S. VEERA JAGATHEESHWARAN

Designation	Assistant Professor
Joining Date	30-07-2022
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	02 Years
Email id	veerajagatheesh.j@miet.edu

K.BASKAR

Designation	Assistant Professor
Joining Date	21-04-2022
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	7 Years 10 Months
Email id	baskar.k@miet.edu

Dr. K. PANNEER SELVAM

Designation	Assistant Professor (SL.Gr)
Joining Date	28-06-2017
Qualification	M.E., Ph.D
Nature of association	Regular
Experience (in Years)	11 Years 10 Months
Email id	kpselvam@miet.edu

Dr. G.PRANESH

Designation	Assistant Professor (SL.Gr)
Joining Date	15-04-2021
Qualification	M.E., Ph.D.
Nature of association	Regular
Experience (in Years)	8 Months
Email id	pranesh@miet.edu

S. KUMARADEVAN

Designation	Assistant Professor
Joining Date	06-07-2011
Qualification	M.E., (Ph.D)
Nature of association	Regular
Experience (in Years)	10 Years 5 Months
Email id	kumaradevan.s@miet.edu

P.MARIYA FELIX

Designation	Assistant Professor
Joining Date	18-08-2021
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	9 Years
Email id	mariyafelix.p@miet.edu

R.RAMESH

Designation	Assistant Professor
Joining Date	03-12-2021
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	5 Years
Email id	rameshraja@miet.edu

V.RAJESWARAN

Designation	Assistant Professor
Joining Date	03-12-2021
Qualification	M.E., MBA.,
Nature of association	Regular
Experience (in Years)	9 Years
Email id	rajeswaran.v@miet.edu

K.VIJAYAKUMAR

Designation	Assistant Professor
Joining Date	06-04-2022
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	10 Years 08 Months
Email id	vijayakumar.k@miet.edu

R.NARAYANAN

Designation	Assistant Professor
Joining Date	06-04-2022
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	9 Years
Email id	narayanan.r@miet.edu

M. MOHAMED IBRAHIM

Designation	Assistant Professor
Joining Date	30-07-2022
Qualification	M.E.,
Nature of association	Regular
Experience (in Years)	2 Years
Email id	ibrahim.m@miet.edu

Curriculum Details

UG - CURRICULUM SYLLABUS R-2013

UG - CURRICULUM SYLLABUS R-2021

UG - CURRICULUM SYLLABUS R-2017

PG - CURRICULUM SYLLABUS R-2017

PG - CURRICULUM SYLLABUS R-2021

Value Added Courses

2019-2020

Non-Destructive Testing Techniques to Minimize Weld Defects
Modeling of an Engine Assembly by Using Fusion 360°

2018-2019

Machine drawing and steel structural detailing by using Auto cad software
Rapid Manufacturing Technologies
Manufacturing Automation

2017-2018

Hands on training program on CNC by using Autodesk HSM Pro
Non Destructive Evaluation
Design procedure of Jigs and Fixtures
Modeling of an Engine Assembly by Using FUSION 360

2016-2017

Recent developments in IC engines
Advanced 3D Modelling in Autodesk Inventor 2016
Cogeneration and residual Heat recovery systems

2015-2016

Advanced 3D Modelling in Autodesk Inventor 2016
Recent technology in automation (Robotics)
Advances in kinematics of machinery

Innovative Teaching

The department initiates innovative methods to make the students actively participate in the teaching-learning process through student centric learning activities such as google class room, audio/video lecturers, peer to peer learning, role play, demonstration of model, Inquiry based learning, collaborative learning etc.,

Google Classroom

The google classroom label describes the teaching structure that has students watching pre-recorded lessons at home and completing in-class assignments, as opposed to hearing lectures in class and doing homework at home. Teachers who implement the google classroom model often film their own instructional videos, but many also use pre-made videos from online sources.

Peer to Peer Learning

Three or four like-minded students are pooled together to form a group and to help each other in academic activities to excel in University examinations. The members of each group coordinate their efforts by producing quality output of the task given to them. Every member of the group shares his/her knowledge and ideas with other members of the group. It enhances individual’s knowledge and skills and inculcates team work and leadership quality. Peer to Peer review is obtained through which students are actively involved in their own learning and establishing a connection between the learner and the learning object.

Role play

An important key element to understand the concepts. In this activity a group of students are actively involved to demonstrate a particular concept in action. This will help the students to comprehend the topics with ease. The purpose of these activities is to ensure tracking students development, revealing the learning progress, highlighting the best work and involving the students in assessment process.

Demonstration of models

The real time working models are demonstrated in the class to connect the tangible model with the theoretical concept. This helps the students to easily understand the working principles of electrical engineering components.

Inquiry-based Learning

Encouraging students to ask questions and investigate their own ideas that helps in improving their problem-solving skills

Collaborative learning

Collaboration allows students to actively participate in the learning process by talking with each other and listening to others opinions. Collaboration establishes a personal connection between students and the topic of study and it helps students think in a less personally biased way. Group projects and discussions are the topics . Teachers may employ collaboration to assess student’s abilities to work as a team, leadership skills, or presentation abilities

Course Materials

Semester	Subject Code / Name
1	PH 8151 Engineering Physics
1	CY 8151 Engineering Chemistry
1	GE 8152 Engineering Graphics
3	CS 6306 Strength of Materials
3	CE 8394 Fluid Mechanics & Machinery
3	ME 6302 Manufacturing Technology – I
3	Kinematics of machinery
4	Manufacturing technology-2
4	Engineering thermodynamics
4	Thermal Engineering
4	Engineering materials and metallurgy
5	ME 6502 Heat and mass transfer
5	ME 6503 Design of Machine Elements
5	ME 6501 Computer Aided Design
5	ME 6505 Dynamics of Machines
5	ME 6504 Metrology & Measurements
5	GE 6075 Professional Ethics and Human Values
6	MG 6851 Principles of Management
6	ME 6603 Finite Element Analysis
6	ME 6004 Unconventional Machining Processes
6	ME6601 Design of Transmission Systems
6	ME 6604 Gas Dynamics and Jet Propulsions
6	ME 6602 Automobile Engineering
7	Mechatronics
7	Total quality management
7	Power Plant Engineering
8	Advanced I.C. Engines
8	Production Planning and Control

Events Organized

Guest Lecture: “ENERGY AND ITS NEED FOR SOCIETY
Venue : – ‘C’ Block Seminar Hall                                        Target Audience: IVYear MECH

Resource person             : Dr. K. Pannirselvam
Associate Professor
Mechanical Department
NITT, Trichy-15

Objective of Program       : 1.To update the career growth in Mechanical related platform.
1. To gain the acquire knowledge in future trends.
Topics Covered : Energy Engineering, Thermodynamics, Renewable energy resources

Outcomes : 1.The students are gained their knowledge about the future trends in

Mechanical Engineering.
1. 2. The students are also known about the concepts Energy.
PO & PSO Mapping:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2

H M H M M M – – – M – – H M
Analytics the way forward for maintenance
Guest Lecture: “Analytics the way forward for maintenance” on 30.09.2022

Venue : – ‘C’ Block Seminar Hall                                        Target Audience: III Year MECH

Resource person             : Dr. Malolan Sundararaman
                                              Department of Management Studies
                                              National Institute of Technology,
                                              Tiruchirappalli – 620 015, India

Objective of Program      : 1. To update the career growth in electrical related platform.
1. To gain the acquire knowledge in future trends.
Topics Covered                 :    Maintenance Engineering, Fluid filling machine- filling process,

           Traditional maintenance.

Outcomes                         : 1. The students are gained their knowledge about the future trends in

             Mechanical Engineering.
1. The students are also known about the concepts of Fluid filling
Machine- filling process etc.

PO & PSO Mapping:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2

H M H M M M – – – M – – H M
Performance improvement of Solar Photovoltaic Modules
Venue on: 27-05-2022, @ ‘C’ Block Seminar Hall Target Audience: IIIYear MECH

Resource person: Dr. K. Ramanathan, M.E., Ph.D., Professor & Head, Department of Mechanical Engineering,Alagappa Chettiar Government College of Engineering and Technology,Karaikudi – 630 003

Objective of Program: 1. To gain the acquire knowledge in Solar Photovoltaic Modules. 2.To gain knowledge in various Solar Application.

Topics Covered: 1.Different type of Solar Panel types and its variants. 2.Environmental Impacts on Solar Modules

Outcomes: 1.Students able to develop the solar energy products. 2. Radiation and environmental impacts on Solar panels.

PO & PSO Mapping:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2

H M H M H – – – – H – – H M
Recent Trends, Technologies and Opportunities in Mechanical Engineering
Venue on: 13-05-2022 @ ‘C’ Block Seminar Hall Target Audience: IV Year MECH

Resource person: Er. S. Srinivasan, B.E, Deputy Engineer, Bharat Heavy Electricals Limited (BHEL),Tiruchirappalli – 620 014

Objective of Program: 1. To update the career growth in right platform. 2.To gain the acquire knowledge in future trends.

Topics Covered: Additive Manufacturing, Digital Twin Technology, Green Manufacturing.

Outcomes: 1.The students are gained their knowledge about the future trends in Mechanical Engineering.

2.The students are also known about the concepts of Recent Manufacturing methods, Job opportunities in public Sectors etc.

PO & PSO Mapping:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2

H M H M H – – – – H – – H M
Industrial Expectations from Engineers
Department of Mechanical Engineering, M.I.E.T. Engineering College, Trichy organized a guest lecture on “Industrial Expectations from Engineers” for the Second year Mechanical Engineering students on 19.08.2019 at C-Block seminar hall – 11.00A.M in M.I.E.T Engineering College, Trichy. The Head, Dr.D.Saravanan, Department of Mechanical has given the welcome address. Dr.T.Karthikeyan, Director, Planning & Development, M.I.E.T Engineering College felicitated the function.The chief guest was Mr.S.Senthilkumar, Assistant Professor, Mechanical Engineering Department, Alagappa Chettiar Government College of Engineering and Technology (ACGCET). The Director and HOD honored the guest with a shawl and our student M.Naveen Kumar of 2^nd year Mechanical gave a brief introduction about the guest.

Guest Lecture content: In his special address, he pointed out the importance of Engineering courses and its huge employability opportunities around the world. While talking about the industry expectations, he focused on creativity skills, time keeping, and basics of technical knowledge, Professional attitude and so on.He also said about the importance of club activities, particularly about SAE (Society of Automotive Engineers) activities. He also has shown a full video on ‘Tractor design and fabrication’, which made the students motivated and to think in other perspectives outside the curriculum.Towards the end of the program there was an interaction with the students which went on very lively and the students were able to update their knowledge regarding industry expectations. Our Second year student, M.Sivaganesh, Department of Mechanical Engineering, M.I.E.T Engineering College, proposed the vote of thanks.
Industrial Safety Engineering
Department of Mechanical Engineering, M.I.E.T. Engineering College, Trichy organized a guest lecture on “Industrial Safety Engineering” for the Third year Mechanical Engineering students on 22.08.2019 at B-Block seminar hall – 2.00 P.M in M.I.E.T Engineering College, Trichy. . The Head, Dr.D.Saravanan, Department of Mechanical has given the welcome address. Dr. X.Susan Christina, Principal, M.I.E.T Engineering College felicitated the function.The chief guest was Mr.K.R.Balasubramanian, Associate Professor, Mechanical Engineering Department, NIT, Trichy.The Principal and HOD honored the guest with a shawl and our student S.Karthikeyan of 3rd year Mechanical gave a brief introduction about the guest.

Guest Lecture content: In his special address, he pointed out the importance of Safety Engineering in an industry. He introduced about the concept of Safety Management System (SMS) and explained about principles and methods in SMS implementation briefly. He also showed many videos regarding safety & health awareness and industrial accidents due to poor safety measures.Towards the end of the program, there went keen interaction by students which went on very lively and the students were able to update their knowledge regarding industry safety issues and future industrial trends in India. There went a discussion on “Nuclear energy needs” and its level of safety in utilizing those resources.

Our Third year student, S.N.Shagul Hameed, Department of Mechanical Engineering, M.I.E.T Engineering College, proposed the vote of thanks.
Petroleum Conservation Research Association (PCRA)

We have organized a Technical guest lecture for our Final year Mechanical Engineering Students (63+59 = 122 students) in our Engineering College Seminar hall on 05.09.2017 in collaboration with Petroleum Conservation Research Association (PCRA). The Program started with an Introduction of PCRA and its activities followed by a Presentation on Energy Scenario and Challenges by Mr.P.Kothandaraman, DGM (Retd), BHEL and External Faculty PCRA and later dealt with ‘Heat Energy” applications and scope for energy conservation. This was followed by screening of a few short films on Energy, Energy Conservation and Fuel Saving Tips. The Presentation made by Mr.S.Mahadevan, consultant and External Faculty PCRA, covered Energy, Energy Conservation and Energy Efficiency, focusing on Electrical Energy with examples and Case Studies. The Students actively participated in the Interactive Session that followed with interesting and probing questions. This lecture enhanced the student’s energy crisis arena which is related to their academic subject Power plant Engineering. The feedback from the students about the program has been found excellent and energetic.
Tools and Techniques of TQM – Management perspective

We have organized a Technical guest lecture for our Final year Mechanical Engineering Students (63+59+61+64 = 247 students) as per academic schedule for two days in our Engineering College Auditorium. Dr. C.Thirumal Azhagan, Assistant Professor, Department of Management Studies, University College of Engineering, BIT Campus, Anna University, Tiruchirappalli has delivered the technical guest lecture on “Tools and Techniques of TQM – Management perspective” for final year students organized by Mechanical Engineering department on 26.07.2017 and 27.07.2017.This lecture enhanced the student’s managerial and leadership ability and quality in the industrial arena. Technical guest lecture topics covered the various aspects and concepts of Total Quality Management tools and techniques which are related to their academic subject Total quality management. The feedback from the students about the program has been found excellent and energetic.
Heat and Mass Transfer

We have organized a Technical guest lecture as per academic schedule in our Engineering College Auditorium on 26.09.2017 forenoon and afternoon. Dr. S.Venkatachalapathy, Associate Professor, Department of Mechanical Engineering, NIT, Tiruchirappalli has delivered the technical guest lecture on “Heat and Mass Transfer” for our Third year Mechanical Engineering Students (71+67+69 = 207 students). This lecture enhanced the student’s understanding ability related to thermal engineering arena. Technical guest lecture topics covered the various aspects and concepts of Conduction, Convection, Radiation and techniques which are related to their academic subject Heat and Mass Transfer. The feedback from the students about the program has been found excellent and useful.
Corporate Expectations from a fresher employee and what the employee should do to fit in and excel in an organization

Training and placement cell have organized a Technical guest lecture for our Final year Mechanical Engineering Students (63+59+61+64 = 247 students) in our Training and placement Seminar hall on 28.08.2017 in collaboration with ISUZU Motors India. The Program started with an Introduction of ISUZU Motors India and its activities followed by a Presentation on “Corporate Expectations from a fresher employee and what the employee should do to fit in and excel in an organization” by Mr. Vinoth, HR Manager, ISUZU Motors India and Mr. Mahesh, HR Manager, ISUZU Motors, India. During the interaction the spokesperson had elucidated the corporate expectations and needs. It was an eye opener for the students to access and identify common avenues of interaction with industry.The Students actively participated in the Interactive Session that followed with interesting and probing questions. Some of the key points discussed during the interaction were Human needs, fresher’s need, Organization’s Need from a fresher and the tips to excel and fit in the organization. The feedback from the students about the program has been found excellent and energetic.
Introduction to Fluid Machinery

We have organized a Technical guest lecture as per academic schedule in our Engineering College Auditorium on 27.09.2017 forenoon and afternoon. Dr. T.Suthakar, Associate Professor, Department of Mechanical Engineering, NIT, Tiruchirappalli has delivered the technical guest lecture on “Introduction to Fluid Machinery” for our Second year Mechanical Engineering Students (71+67+69 = 187 students).This lecture enhanced the student’s understanding ability related to Fluid Mechanics arena. Technical guest lecture topics covered the various fundamental postulates of Fluid machineries (Turbo machines) which are related to their academic subject Fluid mechanics. The feedback from the students about the program has been found excellent and useful.

Laboratory Details

Engineering Practices Laboratory

Power Tools:(a) Planer 2 Nos, (b) Hand Drilling Machine 2 Nos, (c) Jigsaw 2Nos, Arc welding transformer with cables and holders 5 Nos., Centre lathe 2 Nos, Study-purpose items: centrifugal pump, air-conditioner.

Manufacturing Technology Laboratory

Centre Lathe Light duty, Universal milling machine, Vertical Milling Machine, Surface Grinding Machine, Shaper, Turret and Capstan Lathes, Cylindrical Grinding Machine, Radial Drilling Machine, Centerless grinding machine, Universal Gear hobbing machine, Tool and cutter grinder.

Dynamics Laboratory

Motorized gyroscope, Governor apparatus – Watt, Porter.

Metrology and Measurements Laboratory

Floating Carriage Micrometer, Tool Makers Microscope, Mechanical / Electrical / Pneumatic Comparator, Surface finish measuring equipment.

Mechatronics Laboratory

Basic Pneumatic Trainer Kit with manual and electrical controls/ PLC Control, Basic Hydraulic Trainer Kit, Hydraulics and Pneumatics Systems Simulation Software, 8051 – Microcontroller kit with stepper motor and drive circuit sets.

CAD/CAM Laboratory

Computer server, Lenovo Core I3 systems, Acer Pentium Dual Core System, Auto cad 2016 (CAD Software), Auto Desk inventor (CAD Software), A3 size plotter, Laser Printer, MTAB XLturn CNC Lathe, MTAB XLturn CNC Mill 1 No, Nastron(CAM software), Autodesk HSM Pro -125 Nos

Thermal Engineering Laboratory
C Engine – 2 stroke and 4 stroke model 1 set, 4-stroke Diesel Engine with mechanical loading. 1 No ,4-stroke Diesel Engine with electrical loading. 1 No. Multi-cylinder Petrol Engine 1 No.,Single cylinder Petrol Engine 1 No. Steam Boiler with turbine setup 1 No.Single stage reciprocating air compressor 1 No.,HC Refrigeration System 1 No.

Student Achievements

Conference / Symposium details

S. No	Name of the student	Year	Organized by (Institution / Industry)	Date	Prizes won
1	T. Thendral	Research Scholar	PAAVAI College of Engineering	01.11.2022	National Conference Participation
2	B. Mohamed Arif	IV	SARANATHAN College of Engineering	29.10. 2022	Technical Symposium Participation
3	A. Mohamed Nawaz	IV	SARANATHAN College of Engineering	29.10. 2022	Technical Symposium Participation
4	T. Thendral	Research Scholar	Nehru Institute of Technology, Coimbatore.	13.10.2022 – 14.10.2022	International Conference Participation
5	E. Ragavan	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Participation
6	S. Raja Mohamed	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Paper Presentation – Second
7	R. Abdul Faizal	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Paper Presentation – Second
8	S. Raja Mohamed	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium CAD Modelling – First
9	M. Prakashraj	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Technical Marketing – First
10	E. Ragavan	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Technical Marketing – First
11	S. Purusothaman	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Technical Marketing – First
12	E. Prasath	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Technical Marketing – First
13	R. Abdul Faizal	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium CAD Modelling – Participation
14	M. Prakashraj	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Mr. Mechanic – Participation
15	T. Karthikeyan	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium CAD Modelling Participation
16	M. Mohamed Abdul Saleem	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Paper Presentation – Participation
17	M. Mohamed Abdul Saleem	IV	PAAVAI College of Engineering	29.10.2022 – 30.10.2022	Technical Symposium Technical Marketing – FIRST
18	S. Raja Mohamed	IV	Kongunadu College of Engineering and Technology	29.10.2022 – 30.10.2022	Technical Symposium Paper Presentation – Second
19	R. Abdul Faizal	IV	Kongunadu College of Engineering and Technology	29.10.2022 – 30.10.2022	Technical Symposium Paper Presentation – Second
20	S. Dinesh	IV	Dhanalakshmi Srinivasan Engineering College (AUTONOMOUS)	30.10.2022	Technical Symposium Davinc Code Painting – Participation
21	S. Ezhil Muhilan	IV	Dhanalakshmi Srinivasan Engineering College (AUTONOMOUS)	30.10.2022	Technical Symposium Davinc Code Painting – Participation
22	A. Mohamed Jalal	IV	Dhanalakshmi Srinivasan Engineering College (AUTONOMOUS)	30.10.2022	Technical Symposium CAD Modelling – Participation
23	M. Mohamed Suhail	IV	Dhanalakshmi Srinivasan Engineering College (AUTONOMOUS)	30.10.2022	Technical Symposium Davinc Code Painting – Participation
24	R. Abdul Faizal	IV	St. Joseph College of Engineering	23.09.2022	Technical Symposium Paper presentation – First
25	S. Raja Mohamed	IV	St. Joseph College of Engineering	23.09.2022	Technical Symposium Paper presentation – First
26	E. Ragavan	IV	St. Joseph College of Engineering	23.09.2022	Technical Symposium Paper presentation – First

NPTEL Course

S. No

Name of the student

Year

Organized by

(Institution / Industry)

Date

Prizes won

J. James Peter Samuel

III

Indian Institute of Technology, Madras

Jul – Oct 2022

(12 week course)

NPTEL Online Certification curse on ‘Engineering Graphics and Design’ score of 80% – Elite

Workshop details

S. No	Name of the student	Year	Organized by (Institution / Industry)	Date	Prizes won
1	J. Infant Raj	IV	ABC Scientific Publications	Nov’2022	Workshop on Basic Engine Making Technique – Participation
2	A.Akash Subramaniyan	IV	ABC Scientific Publications	Nov’2022	Workshop on Basic Engine Making Technique – Participation
3	R. Hariharan	IV	ABC Scientific Publications	Nov’2022	Workshop on Basic Engine Making Technique – Participation
4	N.S. Amjath Hussain	III	IIT Madras Research Park, Chennai	30.10.2022	Workshop on Robotics -Participation
5	N.S. Amjath Hussain	III	IIT Madras Research Park, Chennai	29.10.2022	Workshop on ARDUINO -ANALOG 22 – Participation
6	S. Raja Mohamed	IV	SAEINDIA SOUTHERN SECTION, Chennai.	16.10.2022	Volunteer – Students Member – Participation
7	N.S. Amjath Hussain	III	IIT Madras Research Park, Chennai.	02.10.2022	Workshop on Automotive Electronics AUTO’22 -Participation
8	N.S. Amjath Hussain	III	IIT Madras Research Park, Chennai.	01.10.2022	Workshop on Electric and Hybrid Vehicle (Electric 2022) -Participation
9	N.S. Amjath Hussain	III	Decibels Lab private Limited, Bangalore.	24.09.2022	Bootcamp on Electric Vehicle Powertrain – Participation
10	N.S. Amjath Hussain	III	GUVI Google for Education Partner	16.09.2022 – 18.09.2022	Python Workshop – Participation
11	N.S. Amjath Hussain	III	Decibels Lab private Limited, Bangalore.	24.08.2022	Bootcamp on 2D and 3D Meshing using Altair HyperMesh – Participation
12	N.S. Amjath Hussain	III	Manchester Engineers Centre, Coimbatore.	05.08.2022	Workshop on E-Vehicle Design – Participation
13	M. Sasiram	M.E – I year	Indian Institute of Information Technology, Tiruchirappalli	25.07.2022 -31 .07.2022	Workshop on 3D Printing Machines for Manufacturing the Engineering Products – Participation

Internship Training details

S. No	Name of the student	Year	Organized by (Institution / Industry)	Date	Prizes won
1	A. Yuva Prasath	III	FLDEC DSS Pvt. Ltd, SIDCO, Guindy, Chennai.	19.09.2022 – 30.09.2022	Internship Training- Participation
2	J. James Peter Samuel	III	National Small Industries Corporation Limited, Chennai.	22.08.2022 – 29.08.2022	Internship Training on Industrial Based Embedded with AI & IOT – Participation
3	D. Gnanaraj	III	National Small Industries Corporation Limited, Chennai.	22.08.2022 – 29.08.2022	Internship Training on Industrial Based Embedded with AI & IOT – Participation
4	S. Ashik Ahamed	III	National Small Industries Corporation Limited, Chennai.	22.08.2022 – 29.08.2022	Internship Training on Industrial Based Embedded with AI & IOT – Participation
5	R. Logeswaran	II	Tamilnadu State Transport Corporation (Kumbakonam) Ltd.	10.08.2022 – 16.08.2022	Inplant Training – Participation
6	J. Farook Firthose	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
7	P. Mohamed Raj Safwan	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
8	J. Infant Raj	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
9	M. Hari Prasath	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
10	M. Mohamed Abdul Saleem	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
11	K. Arunkumar	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
12	S. Inigo Praveen	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
13	A. Akash Subramaniyan	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
14	S. Mohamed Riyas	IV	National Small Industries Corporation Limited, Chennai.	25.07.2022 – 01.08.2022	Internship Training on Industrial Based Application Design and Development – Participation
15	R. Abdul Faizal	IV	National Institute of Technology, Tiruchirappalli	01.05. 2022 – 31. 07.2022	Summer Internship on Design and Testing of Wind Turbines – Participation
16	R. Abdul Faizal	IV	MARS Exploration Pvt Ltd	01.03.2022 – 07.04.2022	Internship Training on Aircraft Design – Participation

Name of the Student

Year

Date

Prizes won

C.AMBICAPATHI

08.03.2019

PAPER PRESENTATION– II

C.AMBICAPATHI

08.03.2019

CAD MODELING – I

A.Jakir Hussain

15.02.2019

SUDOKU - I PRIZE

S.Abdul Ajees

15.02.2019

TECHNICAL QUIZ - I PRIZE

S.Abdul Ajees

15.02.2019

MODEL MAKING - II PRIZE

A.Jakir Hussain

15.02.2019

RAPID FIRE - II PRIZE

A.Jakir Hussain

18.01.2019

CHESS - III PRIZE

K.MUHAMMED

18.01.2019

CODE CRACKING - II PRIZE

K.MUHAMMED

18.01.2019

MODEL MAKING - II PRIZE

K.MUHAMMED

03.09.2016

QUIZZ BUZZ - II PRIZE

Students Projects

Purpose of Project Work:

Project Work is a learning experience which aims to provide students with the opportunity to synthesise knowledge from various areas of learning, and critically and creatively apply it to real life situations. This process, which enhances students’ knowledge and enables them to acquire skills like collaboration, communication and independent learning, prepares them for lifelong learning and the challenges ahead.

Learning Outcomes

The learning outcomes identify the key areas of learning of the subject. Four learning outcomes are separately articulated: knowledge application, communication, collaboration and independent learning. While students learn to work in groups, they will also learn independently through self-reflection and evaluation of their own work processes. These learning outcomes exist in dynamic interplay rather than as compartmentalized and distinct categories. The following are the learning outcomes for project work:

Domains	Learning Outcomes
Knowledge Application	Students will acquire the ability to make links across different areas of knowledge and to generate, develop and evaluate ideas and information so as to apply these skills to the project task.
Communication	Students will acquire the skills to communicate effectively and to present ideas clearly and coherently to specific audience in both the written and oral forms.
Collaboration	Students will acquire collaborative skills through working in a team to achieve common goals.
Independent Learning	Students will be able to learn on their own, reflect on their learning and take appropriate actions to improve it.

BATCH NO	NAME	REG NO	TITLE
1	812415114007	Ajith Kumar (19.12.1997). B	EXPERIMENTAL INVESTIGATION ON PERFORMANCE ,COMBUSTION AND EMISSION CHARACTEISTICS OF PONGAMI BIO DIESEL ON A CI ENGINE
	812415114013	Anees Mohamed. U
	812415114014	Anes Rahman. N
	812415114028	Diwan Mohamed Hasan. S
2	812415114002	Abdul Jaffar. A.B	FABRICATION OF MULTIFUNCTIONAL AGRICULTURE VECHICLE USING ADRUINO UNO BOARD
	812415114010	Aloysius Thomas. X
	812415114045	Jegan Prabhu. A
	812415114046	Joseph Pathiyanathan. T
3	812415114001	Abdul Basith. A	EXPERMENTAL INVESTIGATION OF WEAR CHARACTERISTICS OF SILICON NITRIDE -TITANIUM NITRIDE BIO CERAMICS
	812415114009	Alfred John
	812415114033	Gopal. A
	812415114034	Gopinaath. M
4	812415114018	Arun Kumar. M	WORKING OF ABRASIVE JET MACHINING USING AIR AS WORKING FLUID
	812415114027	Dinesh Kumar. S
	812415114031	Ferose Ahamed. L
	812415114037	Gunasekar. M
5	812415114703	Asik Deen. S	EXPERIMENTAL INVESTIGATION OF CUTTING PARAMETER OF EN-24 STEEL BY USING MULTI OPERTIONAL TOOL HOLDER
	812415114319	Gobikrishna. P
	812415114320	Gopala Krishnan. S
	812415114311	Ariff Kamaldeen. M
6	812415114003	Adheeb. A	EXPERIMENTAL INVESTIGATION OF PHYSICAL AND BIO COMPATIBILITY CHARACTERISTICS OF SILICON NITRIDE-TITANIUM NITRIDE BIO-CERAMICS
	812415114029	Eniyan. V
	812415114030	Fasil Ahamed. M.S
	812415114032	Gokulakrishnan. S
7	812415114307	Aravindh. K	EXPERIMENTAL ANALYSIS OF MECHANICAL PROPERTIES IN METALLIC AND NONMETALLIC FOR SPUR GEAR
	812415114314	Blessing. I
	812415114316	Daniel Jayakumar. A
	812415114321	Gowtham. M
8	812415114006	Ajithkumar. R	EXPERIMENTAL INVESTIGATION OF PERFORMANCE COMBUSTION AND EMISSION CHARACTERISTIC OF WASTE CHICKEN FAT BIO-DIESEL ON CI ENGINE
	812415114011	Ambicapathi. C
	812415114012	Anaest Raj. K
	812415114015	Aravindhan. K.R
9	812415114038	Haamith Asraf. T	EXPERIMENTAL AND INVESTIGATION ON COIR FIBER AND BAMBOO FIBER REINFORCED HYBRID COMPOSITE MATERIAL
	812415114039	Habeeb Mohamed. N
	812415114041	Ibrahim. T
	812415114047	Kader Meera. J
10	812415114022	Bharathi. B	EXPERIMENTAL INVESTIGATION ON PERFORMANCE ,COMBUSTION AND EMISSION CHARACTEISTICS OF WASTE LOADING OIL BIO DIESEL ON A CI ENGINE
	812415114024	Devendran. G
	812415114026	Dhinesh. S
	812415114035	Gouthamaraj. M
11	812415114025	Dhinesh. M	PRODUCTION OF BIODEGRADABLE MATERIAL USING TRUNK OF BANANA TREE
	812415114306	Anandhan. S
	812415114317	Edwin Irudhayaraj. U
	812415114702	Anandhasudhan. E
12	812415114017	Arul Pravin. T	WEAR CHARACTERISTICS ANALYSIS OF ZIRCONIA TOUGHNED ALUMINA IN BIO MEDICAL IN BIO-MEDICAL APPLICATION
	812415114043	Infant Fredrick. L
	812415114302	Abivijesh. A.V
	812415114309	Arunkumar. K.R
13	812415114021	Akash. A	DESIGN AND ANALYSIS OF TILLAGE BOX BLADE OF TRACTOR WITH SILICON COATING
	812415114305	Arun Prakash. S
	812415114008	Balamurugan. P
	812415114019	Alwhar Balaji. A
14	812415114312	Aswin. J	DESIGN ANALYSIS AND EXPERIMENTAL VALIDATION OF CHAIN SPROCKET(NYLON N66 WITH SIC)
	812415114313	Binu Denis. J
	812415114315	Cicel Jerom. S
	812415114318	Gideon Sathiyanesan. K
15	812415114303	Abdhul Hameed. S	Experimental investigation and mechanical analysis of post weld treatment on dissimilar steel
	812415114304	Abuthakir Fareed. A
	812415114310	Adaikala Andrews. A
	812415114301	Ashik Khan. A
16	812415114036	Gowthaman. C	EXPERIMENTAL ANALYSIS AND ENHANHEMENT OF MECHANICAL PROPERTIES OF AL 6082AND TIO2
	812415114048	Harish. A
	812415114308	Kalaiselvan. M
	812415114040	Aravinthan. K
17	812415114004	Ahamed Rilah. S	HEAT TREATMENT ANALYSIS OF 2WHEELER SILENCER
	812415114016	Arivunithi. M
	812415114020	Aswin. N
18	812415114088	Muthukumar. S		Experimental Investigation of cold storage system by using phase change
	812415114097	Pappu Raja. K
	812415114332	Manikandan. V
	812415114337	Mohamed Ibrahim. K
19	812415114082	Mohammed Rahil. S		Design and fabrication of hydro and powered light source illumination
	812415114055	Kaviyarasan. E
	812415114090	Nabeel Ahamed. M
	812415114077	Mohamed Niyas. M
20	812415114054	Karuppu Durai. K.A		Design and analysis of sesame reping maching
	812415114060	Manikandan. N
	812415114061	Manikandan. R
	812415114063	Maruthupandiyar. A
21	812415114070	Mohamed Hanifa. K		Analysis of newly fabricated polymer matrix composite reinforced by fine sand
	812415114051	Karpoorasundarapandi. M
	812415114093	Nanthakumar. V
	812415114101	Prabakaran. J
22	812415114053	Karunakaran. R		Experimental Investigation of sugarcane bagasse-coir as natural fibre composite
	812415114050	Kapil. R
	812415114079	Mohamed Sherif. N.S
	812415114073	Mohamed Irfan. M
23	812415114343	Nandha Kumar. B		Design and analysis of shock absorber test rig
	812415114329	Lenin. A
	812415114052	Karthick. M
	812415114100	Pavithran. V
24	812415114064	Mathiselvan. T		Design and evaluation of biomass gasifier for thermal and power application
	812415114096	Nikhil Karan.M. M
	812415114081	Mohammed Ibrahim Ali. J
	812415114058	Mahendra Boopathy. S
25	812415114322	Gunaseelan. J		Performance and analysis of muffler in series exhaust circuit system
	812415114327	John Venis. J
	812415114331	Mageshwaran. R

26	812415114067	Mohamed Ashar Maricar. S		Design and optimization of disc break by using FEA
	812415114078	Mohamed Shaik Dawood. A.M.N
	812415114066	Mohamed Ajmal. J
	812415114072	Mohamed Ibrahim Fazil. H
27	812415114074	Mohamed Ismail. S		Analysis of punching machine load
	812415114084	Mubarak Ali. N
	812415114076	Mohamed Muzzamil. A
	812415114089	Muthumohamedniyas. H
28	812415114344	Naveen Vignesh. V		Portable speed pipe cutting machine by using hydraulic power
	812415114341	Mohammed Yashar. M
	812415114333	Manimaran.N. N
	812415114326	Jaya Prakash. P
29	812415114068	Mohamed Asif. N		Smart route potential generation by using insolent plate system combined with cosmic panel
	812415114059	Maheswaran. K
	812415114075	Mohamedmohideen. A
	812415114330	Logasarathi. M
30	812415114328	Joshva Amrish. A		Manually operated bending machine
	812415114335	Mohamed Abdullah. K
	812415114338	Mohamed Sabeer. S
	812415114339	Mohamed Ujaier. N
31	812415114324	Iyappan. S		Comparision on mechanical properties on Al7175-BiC and Al 7075-Al2O3
	812415114325	Jahir Ushain. B
	812415114336	Mohamed Farook. M
	812415114102	Pappu Raja. K
32	812415114094	Nasik Ahamed. M		Research and analysis of Bio-Plastic product
	812415114086	Mushtaq Ahamed. J
	812415114085	Muhammed Ismail. S
	812415114071	Mohamed Ibrahim. S
33	812415114062	Manivannan. K		Experimental investigation of matrial removal process in EDM with different dielectric fluid
	812415114083	Mouleeshwaran. B
	812415114098	Parthasarathi. S
	812415114099	Parthasarathy. M
34	812415114323	Gunaseelan. Y		Analysis of cutting parameter by multi operational tool holder
	812415114334	Manuram. R
	812415114340	Mohamed Zainal Zameer. M

Batch no.	ERP no.	Reg No.	Name	Project tittle
1	E1142018	812414114018	Arul Britto M	Electro magnet piston and cylinder arrangement
	E1142019	812414114019	Arulmani A
	E1142031	812414114031	Balaji G
	E1142039	812414114039	Elavarasan S
2	E1142001	812414114001	Abbas M	Fuzzy logic analysis for multi response optimization of control parameters in CNC turning of aluminium 6061 alloy
	E1142017	812414114017	Arshath Ahamed N
	E1142022	812414114023	Arunkumar M
	E1142023	812414114022	Arunkumar B
3	E1142006	812414114006	Abubakkar Siddiq S	Design of energy flow in single basin single slope solar still
	E1142007	812414114007	Adhil Mohamed S
	E1142014	812414114014	Anwar Sathath S
	E1142026	812414114026	Asraf Ali S
4	E1142009	812414114009	Ajith Kumar R	Water purification System
	E1142024	812414114024	Ashok M
	E1142029	812414114029	Bala Chandar M
5	E1142003	812414114003	Abdul Rahman S	Generator runs that on water and NAOH solution
	E1142008	812414114008	Afzal Ahamed M
	E1142011	812414114012	Ameer John J
	E1142012	812414114011	Ameerdeen A
6	E1142010	812414114010	Allwinbritto H	External project of BHEL
	E1142020	812414114020	Arulmurugan G
	E1142028	812414114028	Aziz Ar Rahman A
	E1142036	812414114036	Bharathi B
7	E1142016	812414114016	Arokkiaantony M	Automatic Pneumatic cutter
	E1142025	812414114025	Asif Ali S
	E1142027	812414114027	Azarudeen A
	E1142032	812414114032	Balakumar R
8	E1142004	812414114004	Abinesh E	Nesting of irrugular sheetmetal parts using simulated annealimg algorithm(SAA)
	E1142013	812414114013	Anandan M
	E1142030	812414114030	Balaguru K
9	E1142005	812414114005	Abirama Kiruthiga G	Brick machine by VIPRO technique
	E2152240	812414114325	Michael Sebastin I
	E2152265	812414114350	Sindhuja V
10	E2152224	812414114309	Ashik Firtoz N	Production and analysis of rechargable garden trash remover
	E2152225	812414114310	Asiq Mohammed I
	E2152239	812414114324	Manikandan S
	E2152261	812414114346	Santhoshkumar S
11	E1142002	812414114002	Abdul Mubarak S	Fabrication of sewage water dirt cleaner
	E1142021	812414114021	Arumuga Nivas R
	E2152221	812414114306	Anif Jaffrin A
	E2152222	812414114307	Antoni Riseph V
12	E1142040	812414114040	Faizal Khan M	Construction of a pedal poweredcutting machine
	E1142046	812414114046	Gowthaman M
	E1142050	812414114050	Haja Mydeen J
	E1142051	812414114051	Hariharan C
13	E1142033	812414114033	Balamani P	Reverse gear mechanism in two wheeler for physically challenged people
	E1142035	812414114035	Beer Mohamed S
	E1142037	812414114037	Ehasannulla K
	E1142042	812414114043	Ganesh Pandiyan K
14	E1142034	812414114034	Basheer Ahamed S	Hydraulic up and down Escalator
	E1142045	812414114045	Govindaraj R
	E2152232	812414114317	Thoufiq Hussian J
	E2152237	812414114322	Manikandan A
15	E1142038	812414114038	Elanchezhiyan N	Transient vibration analysis on quarter car suspension system
	E1142041	812414114041	Firose Ahamed M
	E2152226	812414114311	Ayal Raj L
16	E1142048	812414114048	Habeebur Rahman M.H	Energy converter
	E1142049	812414114049	Haja Mohideen Javid S
	E1142052	812414114052	Hashir M
	E2152244	812414114329	Mohamed Rilvan S
17	E1142043	812414114042	Ganesh Kumar S	Design and Analysis of magnetic flux of reverse gear
	E1142044	812414114044	Gopinath R
	E1142047	812414114047	Gunavasan S

Batch no.	RegNo	Name	Initial	Project tittle
1	812413114311	Jeya Prakash	V	Evaluation of cryogenic in environment mechanical properties for the dissimilar welding of metal
	812413114041	Ashik Mubin	B
	812413114302	Amanullah	H
	812413114039	Ashik Ahamed	J
2	812413114045	Azharudeen	J	Water purification by using solar power
	812413114022	Antony Stephen Manoj	P
	812413114026	Aravinth	K
	812413114009	Abuthagir Hussain	S
3	812413114006	Abdul Rahman	B	Optimization of stir casted materials on AL with silicon oxide, zirconium oxide and aluminium oxide
	812413114008	Abdul Wahab	S
	812413114010	Ahamed Ilyas	L
	812413114011	Ahamed Raashith	A
4	812413114027	Aravinth	M	Experimental investigation of single point cutting tool using cryogenic technique
	812413114034	Arun Kumar	A
	812413114038	Asfar Ahamed	A
	812413114310	Imran Khan	J
5	812413114015	Akhil Kumar		Analysis and characterisation of aluminium reinforced hybrid composites
	812413114002	Abdul Azeez	A
	812413114024	Aravindh Kumar	R
	812413114031	Arul Prakash	A
6	812413114054	Dhinesh	K	Effect of SIC and GRAPHITE in aluminium metal matrix on work ability behaviour of powder metallurgy hybrid composite
	812413114048	Bhuvaneshwaran	K
	812413114004	Abdul Latheef	A
	812413114007	Abdul Rahuman	P.S
7	812413114003	Abdul Hameed	M	Design of painting robot system to walls of buildings
	812413114036	Arunprasath	R
	812413114052	Desiyan	P
	812413114057	Divakaran	R
8	812413114032	Arun	A	Waterless and odourless toilet
	812413114044	Aspin Raj	P
	812413114046	Balasubramanian	P
	812413114050	Cijo	M
9	812413114028	Aravinth	N	Vehicle using trio energy sources
	812413114020	Alwin Arockia Raj	S
	812413114013	Ajith Kumar	D
	812413114062	Giridharan	A
10	812413114051	Davis Prem	C	Portable air conditioner
11	812413114018	Alex	A	Vehicle using trio energy sources
	812413114033	Arun Jawahar	A
	812413114037	Arun Vaideesh	A
	812413114023	Aravindan	M
12	812413114014	Ajith Kumar	S	Plastic reinforced polymer composite using epoxy as the matrix
	812413114021	Anandaraj	S
	812413114042	Ashik Rahman	S
	812413114316	Mohamed Riyas	M
13	812413114055	Dinesh	V.S	Bio degradable composite from organic wastes
	812413114056	Dinesh Kumar	R
	812413114058	Edison	C
	812413114059	Eswara Kumar	C
14	812413114025	Aravindkumar	A	Self actuating portable dustbin
	812413114301	Abdul Mubeen	A
	812413114308	Hafeezur Rahuman Raheem	A.S
	812413114322	Saravanan	V
15	812413114012	Ajithkumar	K	Technical analysis of AL-CU-SIC
	812413114016	Akilan	T
	812413114019	Alexpandian	K
	812413114029	Arockia Aknal	S
16	812413114035	Arun Kumar	M	Experimental investigation of carbide and tungsten tool in the material of EN8 &EN19
	812413114047	Bharath	K
	812413114049	Chandramouli	B
17	812413114012	Abdul Ajeesh	K	optimization of process parameter in En 32 tool steel while lathe machining process.
	812413114016	Abdul Malik	T
	812413114019	Albasith	K
	812413114502	Ajmal Abdul Rahuman	S
18	812412114501	Sams Nagoor Gani	M	Analysis and investigation of reduction of defects in clutch Maunfacturing
	812413114043	Aslam	K
	812413114053	Deva	B
19	812413114060	Faizal		Experimental investigation of improve heat transfer using PCM with nano particles in thermal equipmments
19	812413114061	Farhath manas
20	812413114064	Gobirajan	R	Optimization and analysis of laser cutting in aluminium composite by RSM method
	812413114102	Manoj	N
	812413114103	Manojkumar	R
	812413114098	Manikandan	P
21	812413114063	Gopinath	P	Experimental Investigation on a piston coating by using Black Oxide
	812413114065	Gowrisankar	M
	812413114084	Kannan	S
	812413114095	Mani	D
22	812413114067	Hariselvavignesh	V	Thermal conductivity test on nano silver coated aluminium fins
	812413114077	Jerald clindon	A
	812413114085	Karthik	K
	812413114086	Karthikeyan	M
23	812413114066	Haribaskaran	M	Investigation of flatness and surface roughness for AISI4340 material using face milling operation
	812413114092	Mahendran	MM
	812413114093	Maheshwaran	M
	812413114080	John sundar	D
24	812413114074	Jainul Abideen	M	Parametric optimization of plasma arc machining
	812413114082	Kalyana kumar	V
	812413114113	Mohamed faizul Azhar	J
	812413114068	Harish Mohamed	H
25	812413114073	Jaffer Sherif	S	Parametric optimization of abrasive water jet machining
	812413114089	Lakshmi Narayanan	G
	812413114101	Manimaran	K
	812413114100	Manikrishnan	M
26	812413114083	Kamil Mohamed	R	An innovation of developing an Electrical energy from existing water velocity by using an agriculture pump.
	812413114096	Manikandan	G
	812413114097	Manikandan	K
	812413114099	Manikandan	S
27	812413114088	Krishna Ramkumar	G	Performance and Emission Analysis on DICI engine using Diesel and Calophyllum inophyllum Methyl Ester blends
	812413114069	Health Royal Hermonson	R
	812413114072	Jafer Sadick	J
	812413114087	Khalelul Rahman	M
28	812413114104	Manoj Kumar	T	Effect of TiC and TiN Magnesium matrix on workablility behaviour of powder metallurgy hybrid composite
	812413114116	Mohamed Ilyas	S
	812413114306	Deepak	N
	812413114325	Sudharsan Pragalathan	N
29	812413114107	Mohaideen Imthiyas	N	CFD Simulation of Enhancing heat transfer rate on double pipe heat exchangers using Augumentation method
	812413114108	Mohamadh Zameer Basha	S
	812413114122	Mohamed Mufid	M
	812413114309	Imran Basha	G
30	812413114114	Mohamed Hasib	R	Optimization of milling process parameter of stir casted Aluminium metal matrix composite by RSM.
	812413114117	Mohamed Ismail	M
	812413114124	Mohamed Nihamathullah	A.N
	812413114112	Mohamed Faheem Riluwan	P.A
31	812413114115	Mohamed Ibrahim	T	Experimental Investigation of pulsed Nd-YAG laser welding on austenite steel SS 202
	812413114120	Mohamed Jiyath	A
	812413114076	Jamil Ahamed	M
	812413114110	Mohamed Ajiththeen	M
32	812413114304	Britto Raj	J	Optimization of tungsten inert gas welding on duplex stainless steel
	812413114090	Madhavan	S
	812413114094	Malaiyarasan	M
	812413114328	Vinoth Kumar	C
33	812413114305	Chandramouly	S	Microwave Sintering of Hybrid Ceramics
	812413114307	Edwin Santhosh	A
	812413114313	Maheswar	J
	812413114314	Mathan	M
34	812413114070	Hendry Johnson	A	Experimental Investigation on various coated piston rings to improve the wear resistance
	812413114121	Mohamed Khaja Suhail	M
	812413114105	Mansoor Thabith	M
	812413114106	Marshal Kirubakaran	M
35	812413114078	Jibiril khan	J	welding of alloy steel to evaluate the mechanical properties by using two various filler rods
	812413114079	Jhon santhosh	M
	812413114109	Mohamed abdullah	B
	812413114123	MohamedNadeem	N
36	812413114135	Mohammed Asharudeen	J	Experimental Investigation on performance and emission characteristics of Waste Cooking oil Bio-diesel on a CI Engine
	812413114129	Mohamed Safi Javith	J
	812413114127	Mohamed Riyaz	S
	812413114149	Najeem Fazil	N
37	812413114142	Murugan	S	Production of multi-span seed planter for various crops using Rotating disc
	812413114141	Mohan Prasath	R
	812413114144	Muthukkumar	N
	812413114146	Muthukumar	M
38	812413114126	Mohamed Riyas	K	Experimental Analysis and Machining Characterisation of Al6063 Metal Matrix with Alumina Oxide Al2O3
	812413114128	Mohamed Rizwan	A.A
	812413114134	Mohamed Thasleem	M
	812413114138	Mohammed Samsudeen	M
39	812413114132	Mohamed Thalha	A	Shape optimization of primary air duct in thermal power plant using CFD
	812413114131	Mohamed Sheik Mohideen	M
	812413114139	Mohan (27.08.95)	V
	812413114162	Prasannaraj	S
40	812413114130	Mohamed Shafeel	K	Experimental Investigation on performance and emission characteristics of Pongamia Bio-diesel on a CI Engine
	812413114133	Mohamed Tharik	A
	812413114180	Safiqur Rahman	A
	812413114181	Safiullah Sheriff	S.A
41	812413114161	Pragatheeswaran	S	Fabrication and Evaluation of bush cutter by ANSYS
	812413114169	Raja Viknesh	R.G
	812413114168	Rajaram	M
	812413114140	Mohan (24.09.95)	V
42	812413114125	Mohamed Rawther	M	Reduction of defects using Taguchi method in sand Casting industry
	812413114160	Pradeep	S
	812413114158	Prabakaran	V
	812413114184	Saravanan (07.06.96)	R
43	812413114143	Mushahudeen	A	Study on the biocompatibility and mechanical characteristics of conventional sintered silicon nitride and zirconia bioceramics
	812413114145	Muthukumar	K
	812413114179	Rishwan Ahamed	T
	812413114182	Salman Barees	A
44	812413114148	Muthuraj	K	Natural Fiber reinforced leaf composite for false roofing applications
	812413114150	Nalin Marshal	A
	812413114171	Rajesh Kannan	S
	812413114321	Raja	R
45	812413114164	Praveen Ram	S	Fabrication and Analysis of brake pad using Palmyra Seed Reinforced Polymer matrix composite
	812413114159	Pradeep	P
	812413114183	Sangeethkumar	K
	812413114312	Krishnakumar	R
46	812413114173	Rajeshwaran	R	Performance and emission analysis on DICI engine using Diesel and Mahua Methyl-Ester Blends
	812413114178	Rangeesh	R
	812413114156	Parthipan	P
	812413114315	Mohamed Nazeem	B
47	812413114137	Mohammed Rafeek	M.S	Design and Working model of Tri-side Tipper Mechanism on Construction Vehicle
	812413114147	Muthukumar	P
	812413114177	Ramprakash	R
	812413114185	Saravanan (05.11.96)	R
48	812413114152	Naveen Prashadh	S	Production of manually operated weed cutter with increased efficiency & cost effectiveness
	812413114155	Nishanthan	G
	812413114165	Raja Durai	T
	812413114176	Ramkumar	R
49	812413114167	Rajarajan	G	Effect of mechanical and corrosion properties on Nickel, Silicon, reinforced Aluminium Metal Matrix Composites (MMC)
	812413114174	Rajkumar	R
	812413114175	Ramesh	A
	812413114170	Rajesh	S
50	812413114317	Mohamed Tharik	N.M	Safety Vehicle for People with Fore limb disability
	812413114318	Navaneethan	T
	812413114319	Pradeep	J
	812413114320	Premnath	S
51	812413114166	Rajamurugavel	C	Production of Seed sprayer machine
51	812413114186	Sathees Kanth Jadeja	S	Production of Seed sprayer machine
52	812413114151	Naveen	K	Experimental Investigation on performance and emission characteristics of waste chicken fat oil Bio-diesel on a CI Engine
	812413114154	Nazeer Ahamed	A
	812413114157	Pasupathi	R
	812413114163	Praveen	C
53	812413114172	Rajesh Kumar	P	Innovative and Rapid Valve lash setting procedure for multiseries Diesel Engines
54	812413114199	Siju	R	Optimization of Turning parameters in AA7075
	812413114224	Thamizhselvan	A
	812413114237	Vignesh (01.04.96)	M
	812413114239	Vignesh	T
55	812413114191	Selvapraveen	U	Design Analysis of Mask Helmet for Pace Bowlers
	812413114202	Sivakarthickguru	R
	812413114227	Umar Mujammil	A.M
	812413114233	Vickyprasath	M
56	812413114188	Sathish Kumar	A	Experimental investigation of resistance spot welding between SS202 stainless steel and Mild Carbon steel alloys
	812413114200	Silambarasan	V
	812413114323	Shanmuga Prasanth	N
	812413114324	Srirengen	N
57	812413114203	Sivaprasath	B	Grinding machine attachment on lathe for suspension spring
	812413114217	Surendhiran	R
	812413114218	Syead Idhrees	T
	812413114242	Vijay	P
58	812413114205	Sooryadeva	K	Welding characterization of dissimilar joints of EN24 alloy steel with ss410 Stainless steel through flux cored arc welding
	812413114221	Syed Ali Yasar Arafath	S
	812413114219	Syed Abdul Kadar	S
	812413114230	Vasantha Kumar	K
59	812413114192	Sengkathirvanan	M	Experimental investigation process parameter optimization of WEDM process of d3 steel
	812413114215	Sukumar	S
	812413114246	Yoganathan	S
60	812413114189	Sathish Kumar	D	Study and Analysis the Effect of Welding on SS304 by Varying Joint Edge Preparation
	812413114204	Sivaraman	P
	812413114247	Zameer Basha	A
	812413114327	Vetriselvan	M
61	812413114187	Sathish	R	Conventional sintering of hybrid ceramics
	812413114206	Soundarapandiyan	K
	812413114207	Stalin	M
	812413114213	Sugan	T
62	812413114197	Sheik Fareeth	A	Comparison and evaluation of SMAW and TIG welding using Gray cast iron
	812413114220	Syed Abuthahir	S
	812413114222	Tariq Ahamed	M
	812413114223	Thameemul Bahurdeen	A.H
63	812413114212	Sudhakar	S	Thermal Conductivity Analysis of Composite Material
	812413114226	Thirumeninathan	C
	812413114231	Velmurugan	R
	812413114232	Venkateshan	K
64	812413114225	Thanavel	S	CFD analysis of aero dynamic on indian hatchback cars
	812413114234	Vignesh	E
	812413114235	Vignesh	G
	812413114238	Vignesh	S
65	812413114228	Vasanthakumar	R	Fabrication of Automatic Multi Point Grease gun
	812413114230	Vasantharaj	C
	812413114241	Vignesh (09.04.96)	V
	812413114245	Yasararafath	S
66	812413114208	Subhash	J	Power generation from leaf spring
	812413114214	Sujith Kumar	V
	812413114216	Sulthan Bathusha	M.A
	812413114240	Vignesh (19.03.96)	V
67	812413114198	Shiva Naresh	R	Particulate Pollution Control Device
	812413114201	Simon	S
	812413114210	Sudhakar	K
	812413114236	Vignesh (28.09.95)	M
68	812413114190	Selvakumar	M	Experimental investigation and optimization of machining parameters for EDM using graphite electrode on HDS11 Tool steel
	812413114193	Shahul Fasith Gani	T
	812413114195	Shaik Fazil Maricar	K
	812413114196	Shameem Ahmed	A.S
69	812413114303	Ansari Ahamed	M	Modification of Rice Starch Water seperators for Household Application
69	812413114243	Vinoth	M

BATCH NO.	ROLLNO		REGNO	NAME	PROJECT TITTLE
1	E1122022		812412114022	BALAJI A	MACHINE IMPROVEMENT PROCESS THROUGH KAIZEN ACTIVITY AT RANE BRAKE LINING TRICHY
	E1122023		812412114023	BALAMURALI K
	E1122032		812412114032	DINESH KUMARAN R
	E1122043		812412114043	GOWTHAM P
2	E2132208		812412114324	MOHAMED THARIK AZEEZ A	DESIGN AND FABRICATION OF AIR CIRCULATORY SYSTEM FOR LOW POWER CONSUMPTION
	E2132209		812412114321	MOHAMED RAFEEK K
	E2132211		812412114326	NOOR MOHAMED J
	E2132223		812412114338	SYED MOHIDEEN P.A
3	E1122034		812412114034	ESWARAN K	DESIGN, MODIFICATION AND ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER
	E1122036		812412114036	FAISHAL RAHUMAN S
	E1122041		812412114041	GOPALAKANNAN R
	E1122046		812412114046	HARIBALAN K
4	E1122009		812412114009	AHAMED MUBEEN I	EXPERIMENTAL INVESTIGATION OF SUITABLE WELD PARAMETERS FOR GAS METAL ARC WELDING PROCESS AT GB INDUSTRIES, TRICHY
	E1122016		812412114016	ARUN K.T
	E1122018		812412114018	ASIF RAHMAN S
	E1122029		812412114029	DHARIK HASAN A
5	E1122010		812412114010	ALMAHASHIF M.F	DESIGN AND FABRICATION OF POWER TRANSMISSION SYSTEM BY USING MAGNETIC COUPLING AND ANALYSIS BY ANSYS
	E2132186		812412114301	ABDUL RASOOL A
	E2132198		812412114313	MANIKANDAN P
	E2132200		812412114315	MOHAIDEEN RIBASH S
6	E1122021		812412114021	BABA MAHABOOB R.K	DISIMILAR JOINTS BETWEEN LOW ALLOY STELL AND HIGH ALLOY STEEL WITH LOW GRADE FILLER WIRE
	E1122028		812412114028	DHANASEKARAN N
	E1122031		812412114031	DHINESH KUMAR M
	E1122047		812412114047	HARIRAMAN N
7	E1122030		812412114030	DHEVENDRAN B	OPTIMISATION OF SURFACE GRINDING PROCESS IN ASTM A352 MATERIAL USING RSM MATHODOLOGY
	E1122040		812412114040	GOKUL RAJ N
	E1122061		812412114060	MANIGANDAN K
	E2132188		812412114303	ASHWIN S
8	E1122001		812412114001	AATHITHAN R	WORKABILITY ANALYSIS OF MAGNESIUM HYBRID METAL MATRIX COMPOUND WITH TIN AND TIC
	E1122012		812412114012	ANNIES TERRANCE ROBIN R
	E1122013		812412114013	ARAVINTH P
	E1122025		812412114025	CHANDRASEKAR T
9	E1122002		812412114002	ABBAS H	HIGHWAY WIND TURBINE
	E1122005		812412114005	ABDUL IJAS AHAMED M
	E1122007		812412114007	ABDUL RAZAK S
	E1122008		812412114008	ABUBAKKAR SITHICK A
10	E1122015		812412114015	ARUN B	PROCESS OPTIMISATION AND EXPERIMENTAL INVESTIGATION ON THE PERFORMANCEOF DI ENGINE FUELED WITH MAHUA FATTY ACID METHYL ESTER AND ITS BLENDS
	E1122019		812412114019	AZARUDHEEN J
	E1122050		812412114049	INAMUL HASAN Z
	E1122051		812412114050	IRSHAD AHAMED J
11	E1122045		812412114045	HAFIL HASSAN Y	EXPERIMETAL ANALYSIS ON MECHANICAL TRIBOLOGY PROPERTIES OF AL-6061 AND AL2O3ZRO2 40F METAL MATRIX COMPOSITE USING STIR CASTING METHOD
	E1122053		812412114052	JAMEEL MOHAMED S
	E2132189		812412114304	BEERMOHAMED S
	E2132218		812412114333	SHEIK MOHAMMED A
12	E1122024		812412114024	BHARATH L	EVALUATION OF RADIATIONAL CHARACTERISTICS OF PLASTIC REINFORCED COMPOSITE FOR ROOFING APPLICATION
	E1122038		812412114038	FRANKO ROBIN J
	E1122054		812412114053	KAILASH RAGHAVENDRA D
	E2132204		812412114319	MOHAMED AZARUDEEN T
13	E1122055		812412114054	KARUNAKARAN R	EXPERIMENTAL INVESTIGATION ON PERFORMANCE COMBUSTION AND EMISSION CHARACTERISTICS OF CASTOR OIL BIODIESEL ON C.I.ENGINE
	E1122056		812412114055	KAVIYARASAN S
	E1122058		812412114057	KIRUBAKARAN J
	E1122059		812412114058	KOLANCHINATHAN T
14	E1122027		812412114027	DEWAN MOHIDEEN S	OPTIMISATION OF PIPE ROUTING BY CHANGING P91 ALLOY MATERIALS
	E1122037		812412114037	FAIZAL RAHMAN S
	E1122049		812412114048	HATHAR OLI K
	E1122052		812412114051	ISMATH BATCHA Z
15	E1122011		812412114011	ANANDHA BASKARAN S	ANALYSIS OF TOOL WEAR WITH ALUMINIUM OXIDE NANO PARTICLES
	E1122017		812412114017	ARUN KUMAR S
	E1122026		812412114026	DEEPAK B
	E1122035		812412114035	EZHILARASAN R
16	E1122014		812412114014	ARIHARASUDHAN S	WORKABILITY ANALYSIS OF MAGNESIUM HYBRID METAL MATRIX COMPOSITE WITH TIN AND WITH BORAN CARBIDE
	E1122039		812412114039	GANAPATHI SUBRAMANIAN P
	E1122042		812412114042	GOPINATH R
	E1122060		812412114059	MANI BHARATHI M
17	E1122006		812412114006	ABDUL RAHMAN S.A	EXPERIMENTAL AND INVESTICATION ON PISTON BY USING RED OXIDE
	E1122057		812412114056	KHIZAR SULAIMAN S.M.B
	E2132201		812412114316	MOHAMED AARIF I
	E2132206		812412114322	MOHAMED RAHMADHULLA T
18	E1122100		812412114098	MOHAMMED BAHEEZ	AUTOMATIC BRICK CUTTER
	E1122104		812412114103	MUSTANSIR HAMZA
	E2132199		812412114314	MASKER
	E2132203		812412114318	MOHAMED ARIF
19	E1122084		812412114081	K. MOHAMED MAHITH	STUDY MECHANICAL PROPERTIES OF COMPOSITES MATERIAL
	E1122087		812412114085	N. MOHAMED MUSTHAK
	E1122091		812412114089	A. MOHAMED RIYAS

20	E1122101		812412114099	A. MOHAMMED RILWAN	LINEAR HYDRO IMPULSE ENERGY TO TORQUE CONVERTER DEVICE
	E1122102		812412114100	S. MOHAMMED SUHAIL
	E1122109		812412114107	M. NATRAJ
	E2132215		812412114330	S. RASHEED AHAMED
21	E1122068		812412114066	B. MOHAMED AFSAR KHAN	COMPARATIVE ANALYSIS OF SAE GRADE ENGINE OIL VS NONEDIBLE OIL
	E1122069		812412114067	A. MOHAMED ALTHAF
	E1122073		812412114071	S. MOHAMED FAHATH
	E1122096		812412114094	F. MOHAMED THAHA ISMAEIL
22	E1122103		812412114101	S. MOHANRAJ	WORKABILITY AND PHYSICAL PROPERTIES ANALYSIS ON GRAPHITE AND MG HYBRID METAL MATRIX COMPOSITE
	E1122110		812412114108	N. NAVEEN KUMAR
	E1122116		812412114113	T. PANDIYAN
	E1122122		812412114120	V. RAJADURAI
23	E1122078		812412114076	A. MOHAMED HUSSAIN	SKIMMED OIL EXTRACTION MILL USING SOLAR ENERGY
	E2132205		812412114320	K. MOHAMED ISMAIL
	E2132207		812412114323	A. MOHAMED RIFASUL HUSSAINUDEEN
	E2132210		812412114325	M. MOSES EMMANUVEL
24	E1122065		812412114083	M. MOHAMED MEERDEEN	EXPRIMENTAL AND INVESTIGATION ON BRAKE DISC PLATE BY USING BLACK OXIDE COATING
	E1122070		812412114068	S. MOHAMED ASHIK
	E1122077		812412114075	A. MOHAMED HIPULLAH
	E1122097		812412114095	H. MOHAMED YASAR KHAN
25	E1122071		812412114069	A. MOHAMED ASHRAF	EXPERIMENTAL ANALYSIS ON MECHANICAL PROPERTIES OF AL-ZRO3-AL2O3 METAL MATRIX COMPOSITE
	E1122075		812412114073	B. MOHAMED FAIZAL
	E1122094		812412114092	M. MOHAMED SAMEER
	E1122112		812412114110	N. NIJAMUDDEEN
26	E2132187		812412114302	M. ARUMUGAM	ASSESMENT OF SURFACE QUALITY THROUGH CONCURRENT PARAMETRIC OPTIMIZATION TECHNIQUE DURING END MILLING OPERATION
	E2132197		812412114312	K. KAVIYARASU
	E2132212		812412114327	D. PALANIYANDI
	E2132190		812412114305	T. CHANDRAKUMAR
27	E1122111		812412114109	S. NAVEEN RAJ	AIR COMPRESSOR ENGINE
	E1122118		812412114115	T. PAVITHRAN
	E1122121		812412114119	N. RAGUL KANNAN
	E1122123		812412114121	R. FAJA PANDIYAN
28	E1122064		812412114063	S. MOHAIDEEN ABDUL LATHIF	FABRICATION AND COMPOSITION OF MECHANICAL PROPERTIES AL-AL2O3+ZRO2(METAL MATRIX COMPOSITE) POWDER USING POWDER METALURGY TECHNIQUE
	E1122076		812412114074	S.R. MOHAMED HAMEEM
	E1122083		812412114102	S.H. MOHAMED KAMALUTHEEN
	E1122113		812412114111	A. NIYAS MOHIDEEN
29	E1122079		812412114077	K.S. MOHAMED IBRAHIM	EXPERIMENTAL INVESTIGATION AND WELDING CHARACTERIZATION ANALYSIS OF DISSIMILAR JOINT OF ALLOY STEEL AND SS430 STAINLESS STEEL
	E1122086		812412114084	S.S. MOHAMED MUSTAFA
	E1122090		812412114083	M.R. MOHAMED RISWAN
	E2132193		812412114308	S. JOSHWA
30	E1122120		812412114118	L. PREM KUMAR	MOTORIZED BRICK CUTTER
	E1122062		812412114061	A. MANI KANDAN
	E1122098		812412114096	M. MOHAMMED ANAS
	E1122085		812412114082	N.K. MOHAMED MAKTOOM NABIL
31	E1122063		812412114062	S. MARX	DEVELOPMENT OF BIO-DEGRADABLE COMPOSITES USING ORGANIC WASTES
	E1122099		812412114097	A. MOHAMMED ARIFF
	E1122119		812412114117	T. PRADEEP

32	E1122066		812412114065	R. MOHAMED ADHAM	DESIGN AND ANALYSIS OF COMPOSITE SPUR GEAR
	E1122067		812412114064	T. MOHAMED ADNAN
	E1122074		812412114072	M. MOHAMED FAISAL
	E1122089		812412114087	H. MOHAMED RISWAN
33	E1122093		812412114091	M. MOHAMED ROSEKHAN	IMPROVEMENT USING MODIFIED QUALITY CONTROL TOOLS
	E1122106		812412114104	J. NAGALINGAM
	E1122108		812412114106	L. NARENDRAKANTH
	E1122117		812412114114	G. PAVITHRAN
34	E1122081		812412114079	A. MOHAMED ISMAIL FAIZAL	COMPOSITE MATERIAL
	E1122088		812412114086	MOHAMED NAFIL MEERAN
	E1122092		812412114090	B. MOHAMED RIZWAN
	E1122095		812412114093	M. MOHAMED SHAJAHATH
35	E1122107		812412114105	M.N. NARAYANAN	ECONOMICAL SOLAR WATER HEATER AND PURIFIER
	E1122115		812412114116	D.PAZHANIVEL
	E2132222		812412114337	B. SURESH KUMAR

36		E1122124	812412114122	D.RAJASEKAR	AUTOMATIC COOLING SYSTEM IN LATHE MACHINE
		E1122146	812412114144	A.SASI KUMAR
		E1122147	812412114145	G.SATHIYANATHAN
		E1122157	812412114155	R.SIVACHANDRAN
37		E1122125	812412114123	N.RAJASEKAR	EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF MACHINING PARAMETERS FOR EDM USING COPPER ELECTRODE ON HOT DIE STEEL
		E1122174	812412114172	R.VIGNESH
		E1122175	812412114173	V.VIJAI KUMAR
		E2132194	812412114309	R.KALAIVANAN
38		E1122126	812412114124	K.RAJESH	DESIGN OF SAFETY MASK FOR BOWLERS USING RPT PROTO TYPE
		E1122127	812412114125	M.RAJESH
		E1122151	812412114149	E.SENKODI SELVAN
		E1122171	812412114169	S.VEERAMANI BALAN
39		E1122128	812412114126	K.RAJESH KUMAR	AUTOMATIC FOUR WHEEL FIXED HYDRAULIC JACK
		E1122130	812412114129	K.RAM PRAKASH
		E1122144	812412114142	S.SAMEER AHAMED
		E1122158	812412114156	K.SIVANESAN
40		E1122129	812412114127	M.RAJU	DESIGN AND FABRICATION OF MODERN HYDRO-PNEUMATIC TROLLEY
		E1122131	812412114128	S.RAMALINGAM
		E1122132	812412114130	P.RANJITH
		E1122149	812412114148	A.SELVA SRINIVASAN
41		E1122136	812412114134	S.RIYAS AHAMED
		E1122148	812412114146	S.SATHIYA RAJ
		E1122162	812412114160	S.SURESH
		E1122173	812412114171	S.VENKATESHWARAN
42		E1122133	812412114131	K.REVANTH	COMPOSITE MATERIAL
		E1122134	812412114132	A.RICHARD MARIA RAJ
		E1122140	812412114137	S.SAKTHIVEL
		E1122141	812412114139	A.SALEEM KHAN
43		E1122138	812412114136	S.SABEER AHAMED	ALUMINIUM 7075 ALLOY
		E1122155	812412114153	H.SHAIK AHAMED
		E1122156	812412114154	S.SHANAVAS
		E1122168	812412114166	M.T.THARVEES AHAMED
44		E1122142	812412114140	A.SALEEM RAJA	EXPERIMENTAL INVESTIGATION AND ROUNDNESS ERROR ON D3 STEEL IN CNC DRILLING PROCESS BY USING CRALN DRILL BIT
		E1122153	812412114151	H.M.SHAHUL HAMEED
		E1122154	812412114152	M.SHAHUL HAMEED
		E1122159	812412114157	J.STANLEY RUBAN
45		E1122150	812412114147	S.SELVAM	OPTIMATION OF CYLINDRICAL GRINDING PARAMETERS OF EN8 CYLINDRICAL RODS USING ANOVA METHODALOGY
		E1122161	812412114159	P.SURESH
		E2132221	812412114336	P.SURENDRA KUMAR
		E2132196	812412114311	A.KAVIYARASAN
46		E1122166	812412114164	B.SYED IBRAHIM	OPTIMUM BLANK UTILIZATION OF SHEET METAL FOR OPTIMAZITION TECHNIQUE
		E2132191	812412114306	M.DAVID FERNANDO
		E2132202	812412114317	A.MOHAMED ABDULLAH
		E2132214	812412114329	V.RAJA
47		E1122163	812412114161	N.SUTHAKAR	VAPOUR ABSORPTION FOR COOLING SYSTEM
		E1122164	812412114162	A.SYED ABDULLAH
		E1122165	812412114163	M.SYED IBRAHIM
		E1122184	812412114182	M.YOUSUF AHAMED
48		E1122170	812412114168	D.VASANTHA KUMAR	AUTOMATIC STAMP PUNCHING MACHINE FOR UNIVERSITY EXAM CELL
		E1122178	812412114175	S.VIJAYARAGAVAN
		E1122179	812412114177	M.VIMAL
		E1122183	812412114181	S.YOGESWARAN
49		E1122172	812412114170	S.VENGATESAN	DESIGN AND FABRICATION OF INVOLUTE GEAR PROFILE ERROR DETECTOR
		E1122176	812412114176	V.VIJAYA PRAKASH
		E1122177	812412114174	N.VIJAY
		E2132216	812412114331	R.SARAVANA KUMAR
50		E1122167	812412114165	V.THANGAPANDI	WELDING OF TUBULAR PRODUCT IN BOILER
		E1122169	812412114167	H.THOUFIQ AHAMED
		E1122180	812412114178	P.VISHAL BHAIRAVH
		E1122181	812412114179	M.VIVEK
51		E2132220	812412114335	T.SURENDAR	OPTIMIZATION OF WIRE CUT EDM
		E2132224	812412114339	P.VIMAL RAJ
		E2132192	812412114307	S.ELAMURUGAN
		E1122182	812412114180	M.YASAR ARAFATH
52		E1122139	812412114138	A.SAKTHI VELU	EXPERIMENTAL INVESTIGATION AND PROCESS PARAMETERS OPTIMIZATION ON D2 STEEL USING TURNING PROCESS
		E1122143	812412114141	S.SALMAN RUSDHIE
		E1122152	812412114150	S.SHAFEEK AHAMED
		E1122160	812412114158	K.SURESH

Research & Development

Research and Development

OBJECTIVE:

The objective of the Research and Development is

To motivate students to carry out innovative and creative projects
To create awareness among students about technical writing and importance of publishing
paper in reputed journals.
To create awareness among students about intellectual property rights (IPR)
To develop teamwork environment

The students choose their favourite area and create projects of their own based on their innovative ideas and implement it effectively with the support of faculty.

WORK PROCESS:

Academic Year	Student details	Projects
2018-2019	I.Selvabarathi, S.Salik Mohammed, T.SusendraVasan, S.Vigneshraja	TREE SHIFTING AND REPLANTING MACHINE: The main objectives of the project are to preserve nature from the road extension projects and building construction, to eliminate the environment degradation and to avoid the deforestation. The proposed mechanism will be very much useful for removing the trees and replanting them without any damage and it is operated by the pneumatic power system in an effective, efficient and economical way. The tree removal and replanting mechanism has being used by the foreign countries in a robust manner. In India, Gujarat is the only state using this machine. The proposed system is an effective, efficient and economic method. This operation can also implement in our state in a less cost. This project has been funded by the Tamilnadu State Council for Science and Technology.
	G.Balaji, M.Chandru, H.FazithRahuman, R.Hariharan	DESIGN AND FABRICATION OF FERTILIZER SPRAYERS: Now days, there are many types of pesticide sprayer already in market. For the different types of pesticide sprayer there are have a different shape, sizes, method to carry it but the function are same. The current idea on sprayer in our project is to utilize effectively for reducing time of spraying, human efforts and cost of spraying. Now days the spraying of crop is done by operator taking pump on back, but we were developing this conventional spraying for reducing efforts and time by using slider crank mechanism and motion transmission by chain and sprocket arrangement principles.
	P. Karunamoorthy, M.Mohamedazarudeen, S. Mohamed bilal, U.S.Mohamedreskallah	DESIGN AND FABRICATION OF STAIRCASE CLIMBING WHEEL CHAIR USING TRI WHEEL MECHANISM: The objective of this work is to develop a mechanism for climbing up and down over stairs for physically disabled people. The mechanism involved is a tri-wheel mechanism for climbing up and down stairs to design a stair-climbing wheelchair for differently-abled person with lower limb disability. The help of tri-wheel mechanism stair-climbing wheelchair, we can move easily up and down on stairs without building ramps in hospitals, by this construction area and money can be reduced for building hospitals.
2017-2018	Gokulakrishnan S, Eniyan V	DESIGN AND FABRICATION OF PLASTIC BOTTLES PEELING MACHINE BY USINGH AND WHEEL: The main objective of the work is to peel the plastic bottle into a fine string with the help of stainless-steel cutter and then using that string we can make a rope. Usually there some heat treatment process should be held to make a rope using plastics. Here, due to peeling the plastic bottles into a fine string. Due to this we can reduce the plastic bottles wastage and the pollution.
	Praveen Arulraj C, Praveen Kumar A, Praveen N, Mohanakavi D	DESIGN AND ANALYSIS OF HACKSAW ATTACHMENT IN CONVENTIONAL LATHE: The hacksaw attachment is attached directly on the face plate and the cutting operation is performed perpendicular to the center axis of the spindle. In the metal working industry one of the most important issues is the cost of the machines and work space. The project is on the design and construction of a hacksaw attachment in conventional lathe machine. It is a cutting machine with teeth on its blade used especially of the machine were designed and constructed.
2016-17	Mohamed Rafick S, Mohamed Salih A, Mohamed Kassim M R, Mohamed Anwar H	DESIGN AND FABRICATION OF WHEEL ASSEMBLY OF GREEN CAR FOR DISABLED PEOPLE: Car for Disabled People offered comprise designing of hand-controlled cars that are perfectly suitable for driving by handicapped persons. Being suitable for physically challenged as well as disabled people, these specially designed cars can be expensively customized and converted to suit specific disability of a person. Further, we can also modify hybrid car versions as demanded by customers based across India. These personalized conversions/changes provided in the automobile allow people to drive these with support of his/her hands or using only one limb.
	Arun A, Aspin raj A, Balasubramanian P, Cijo M	FLUSH FREE TOILET FOR CONSERVATION OF WATER: The main objective of the toilet design is to use in rural areas and water scarcity areas. In normal toilet, nearly five to ten liters of water is used for single flush. So, we planned to save the water and going to use the waste as fertilizer. In this project, we can show a difference when compared to other type of toilet. The main objective is to utilize the water used in flushing for some other efficient purpose. To develop a low cost still efficient toilet for the helpless brothers and sisters of our Indian nation. To reduce the odor created after the usage of the toilet. To develop a better replacement for mobile toilet where sustainability of water supply and sanitation services is highly remote.
	Mohamed Tharik N, Navaneethan T, Pradeep J, Premnath S	SAFETY VEHICLE FOR PEOPLE WITH FORELIMB DISABILITY: For a physically disabled or a debilitated person, transportation is a major hindrance and so the mobility of physically disabled people is among the great concern of the human civilization. It is really very hard to realize the problems and sorrows of a physically disabled or debilitated person who is dependent on others or is confined on a wheel chair with a limited mobility. In India, the contemporarily modified scooters used by the physically disabled people for transportation are not ergonomic and do not provide protection from adverse weather conditions which can be more dangerous for physically disabled people compared to the normal person while driving.

OUTCOME:

The students gained real time hands on experience through their innovative projects. The students acquired knowledge of presenting papers and applying patents for their innovative ideas.

SAEINDIA

SAEINDIA Collegiate clubs provide many benefits to SAE members like tangible contact with their future profession & various objectives on engineering education. The purpose of this Collegiate Club is to increase the benefits of SAEINDIA student membership through special activities.

SAEINDIA recognized the formation of SAEINDIA Collegiate club of MIET Engineering College Trichy for the academic year 2018-2019. We have started with student members of more than 65 students from Mechanical Engineering Department. It offers student members organise programs and activities, fellowship, and leadership experience. SAEINDIA student members are also entitled to many of the services available to SAEINDIA’s regular members.

The club is aimed in bringing out the blooming talents of students. It conducts activities in different aspects of automobile engineering. The main objective of this club is the overall & personal development of students by encouraging them to participate in international / national SAE Collegiate Design Series.

The objectives

To motivate students to apply their theory into practice and supplement their theoretical knowledge into practical with hands on training in the field of automobile engineering
To provide an environment of creativity and innovation by conducting interactive practical programs.
To provide students opportunities to gain experience in administering organizational activities by conducting meetings, taking part in committee activities and writing and speaking before groups.
To stimulate student participation in projects that requires the application of engineering knowledge and promotes professional growth.

Future plan

To make the student to attend internship program/Implant training in month of May
To conduct Product development Workshop in the month of July
To conduct Guest Lecture/Seminar in the month of August and September

Benefits:

Arranges for engineering authorities to provide informal and informative meetings with students.
Stimulates student participation in projects that require the application of engineering knowledge and promote professional growth.
Sponsors visits to industrial plants and engineering research centers.
Encourages students to prepare technical presentations for collegiate club meetings, section meetings and for entry in student level competitions.
Furthers informal contacts with engineers’ active in industry and government through joint meetings with the section.
Provides students opportunities to gain experience in administering organizational activities, concluding meetings, taking part in committee activities and writing and speaking before groups.
Offers social programs that help develop lasting friendships between students themselves, the faculty and section members.
Provides additional exposure for members as well as clubs through the annual student design competitions and with the recognition and awards programs.

Various Technical Events Organized:

Guest lectures
Seminars
Mini projects
Technical Quiz
National Level
Technical Symposium

Professional Society

The objectives

To motivate students to apply their theory into practice and supplement their theoretical knowledge into practical with hands on training in the field of automobile engineering
To provide an environment of creativity and innovation by conducting interactive practical programs.
To provide students opportunities to gain experience in administering organizational activities by conducting meetings, taking part in committee activities and writing and speaking before groups.
To stimulate student participation in projects that requires the application of engineering knowledge and promotes professional growth.

Future plan

To make the student to attend internship program/Implant training in month of May
To conduct Product development Workshop in the month of July
To conduct Guest Lecture/Seminar in the month of August and September

Benefits:

Arranges for engineering authorities to provide informal and informative meetings with students.
Stimulates student participation in projects that require the application of engineering knowledge and promote professional growth.
Sponsors visits to industrial plants and engineering research centers.
Encourages students to prepare technical presentations for collegiate club meetings, section meetings and for entry in student level competitions.
Furthers informal contacts with engineers’ active in industry and government through joint meetings with the section.
Provides students opportunities to gain experience in administering organizational activities, concluding meetings, taking part in committee activities and writing and speaking before groups.
Offers social programs that help develop lasting friendships between students themselves, the faculty and section members.
Provides additional exposure for members as well as clubs through the annual student design competitions and with the recognition and awards programs.

Various Technical Events Organized:

Guest lectures
Seminars
Mini projects
Technical Quiz
National Level Technical Symposium

Industry Interaction

Memorandum of Understanding (MOU) Signed

Interaction of students with MOU signed Industries/R&D organizations occurs following modes.

Invited talks, where personnel from both the industry and the R&D organization are invited to deliver a lecture.
Workshops, conducted on campus by personnel from industry/R&D organizations, or in-plant visits.

Learning Centre (3D printing), Trichy.
M/s. Bharakath Engineering Pvt. Ltd., Thuvakudi, Trichy
M/s. Kothari Sugars Pvt. Ltd., Lalgudi, Trichy.
M/s.CADD Centre, Trichy.
Orbit Edutech Private Limited, Chennai.
Omega industrial Equipments, Chennai
Karpaga Cotton Processing Mills, Salem.

Activity & Events

Placement assurance will be given with a minimum of 3 final year students for every year.
Supporting of faculty research project with technical aspects such as problem fixing and development
Internship Program will be conducted by the Company during semester vacation time.
Academic Project Guidance will be leverage to students by the company
Consultancy and Research Project for Faculty

In Plant Training

The Students of Mechanical Engineering visited industries to gain the knowledge about companies and interact with them to enhance Technical Skills.

The list of various companies Students visited are

M/S.Ashok Leyland,Unit I Hosur,
M/S.Ashok Leyland, Ennore, Chennai.
Diesel Loco Shed, Southern Railway,Ponmalai, Trichy.
TVS Motors (P) Ltd, Hosur
Omega Industrial Equipments, Chennai.
Orbit Edutech Pvt Ltd, Chennai.
Karpaga Cotton processing Mills, Salem.

Internship

The Students of Mechanical Engineering visited industries to gain the knowledge about companies and interact with them to enhance Technical Skills.

The list of various companies Students visited are

ISUZU Motors Pvt.Ltd,, Sricity,A.P
Goodwin Motors, Chennai
Omega industrial Equipments, Chennai.
Karpaga Cotton processing Mills, Salem.
Orbit Edutech Pvt Ltd, Chennai

Industrial visit

The Students of Mechanical Engineering visited industries to gain the knowledge about companies and interact with them to enhance Technical Skills.

The list of various companies Students visited are

Paragon Steels, Pallakad, Kerala,
Minar Alloys & Forgings, Pallakad, Kerala,
Kothari Sugars & Ams, Lalgudi, Trichy
Shanthi Gears LTD-C Unit, Covai
PSG Foundaries,Covai
Roots India Private Limited

Newsletter & Magazine

News Letter

Department newsletter contains various departmental activities like professional activities carried out by the department association such as guest lectures, papers published by students, knowledge delivery forum in the department, research and development activities, awards and recognition received by the faculty members and students.

2018 – 2019 Issue 1

2017 – 2018 Issue 1

2018 – 2019 Issue 2

2017 – 2018 Issue 2

2016 – 2017 Issue 1

2015 – 2016 Issue 1

2016 – 2017 Issue 2

2015 – 2016 Issue 2

Magazine

The department magazine is released once in an academic year. It comprises department profile, department faculty details; technical and non technical papers published by the students and faculty members, department association activities and articles.

2018 – 2019 Issue 1

2017 – 2018 Issue 1

2016 – 2017 Issue 1

2015 – 2016 Issue 1

Contact us

Prof. Dr. B. Selvam
Head of the Department
Department of Mechanical Engineering,
M.I.E.T. Engineering College,
Gundur, Trichy-07.
Mail ID: selvam.b@miet.edu, mech.hod@miet.edu,

DEPARTMENT OF MECHANICAL ENGINEERING

About the Department

Programmes offered:

VISION & MISSION

Program Educational Objectives (PEO) & Program Specific Outcomes (PSO)

PEO

PSO

Faculty

Dr. A. NAVEEN SAIT

Dr. M.Y. ABDUL JALEEL

Dr.B. SELVAM

Dr. M. DHANDAYUTHABANI

Dr.M. KIRUBAKARAN

T. RAMKUMAR

N.ARUNACHALAM

S. DAVID KALAISELVAN

R.MANICKAM

S.SATHISH KUMAR

C.MANIKANDAN

J.S. VEERA JAGATHEESHWARAN

K.BASKAR

Dr. K. PANNEER SELVAM

Dr. G.PRANESH

S. KUMARADEVAN

P.MARIYA FELIX

R.RAMESH

V.RAJESWARAN

K.VIJAYAKUMAR

R.NARAYANAN

M. MOHAMED IBRAHIM

Curriculum Details

Value Added Courses

Innovative Teaching

Course Materials

Events Organized

Guest Lecture: “ENERGY AND ITS NEED FOR SOCIETY

Analytics the way forward for maintenance

Performance improvement of Solar Photovoltaic Modules

Recent Trends, Technologies and Opportunities in Mechanical Engineering

Industrial Expectations from Engineers

Industrial Safety Engineering

Petroleum Conservation Research Association (PCRA)

Tools and Techniques of TQM – Management perspective

Heat and Mass Transfer

Corporate Expectations from a fresher employee and what the employee should do to fit in and excel in an organization

Introduction to Fluid Machinery

Laboratory Details

Student Achievements

Conference / Symposium details

NPTEL Course

Workshop details

Internship Training details

Students Projects

Research and Development

SAEINDIA

Professional Society

Industry Interaction

Memorandum of Understanding (MOU) Signed

In Plant Training

Internship

Industrial visit

Newsletter & Magazine

News Letter

Magazine

Contact us